How much power can a M52B28 handle?
Because you can easily turbo a M52B28 up to 7-8psi with no issues. And that’ll definitely give you about 100 extra hp if you do a 100 octane or higher tune.
How much HP can a M52 handle?
You will absolutely be able to reach 450 rwhp on stock M52 internals.
Is the M52 reliable?
The transmissions on these cars are also very strong and reliable, although you might start to experience some issues above the 150k mark. Maintenance is key. BMW transmission oil is supposed to be “lifetime” but I recommend replacing this every 100k miles, especially on a vehicle this age.
How good is the S52 engine?
The real beauty of this engine comes from its potential and its stone cold reliability. The S52 is incredibly responsive to modifications. It’s not unheard of to see these engines with over 200,000 miles on them with just routine maintenance.
Does E36 have Turbo?
Turbo Addiction: 783 Horsepower E36-generation BMW 3 Series. That BMW had a 455-rwhp turbocharged M52 inline-6. That’s pretty insane in a car as light and old school as simple E30. That little car had more power than the chassis in all likelihood could handle.
How much HP can a stock M50 handle?
Well, the early M50, surprisingly, is actually a pretty tough little engine. In stock form they can withstand roughly 400 horsepower, and with some internal work, over 600 is possible, as is the case with Josh King’s mighty 650hp M50 turbo.
How do I know if I have M52 or S52?
The M52 has a 84 MM (3.3inch) and the S52 has a 89.6mm ( 3.5inch ). Use a dowel and stick it down the spark plug hole and measure.
How strong is the M52?
M52B28. The 2,793 cc (170 cu in) version of the M52 debuted in 1995. It has a bore of 84 mm (3.3 in), a stroke of 84 mm (3.3 in) and produces 142 kW (190 hp).
How much oil does a S52 take?
BMW S52 engine specs
| Manufacturer | Munich Plant |
|---|---|
| Turbocharger | Naturally aspirated |
| Oil consumption , L/1000 km (qt. per miles) | up to 1.0 (1 qt. per 750 miles) |
| Recommended engine oil | 0W-30 0W-40 5W-30 5W-40 10W-40 15W-40 |
| Engine oil capacity, L (qt.) | 5.5 (5.8) |
How much HP can a E36 M3 handle?
The E36 M3 has proven up to 700HP on stock internals.
Can I turbocharge my BMW 328i?
The answer is yes. And yes, you could possibly modify OEM N54 parts to create your N52 turbocharged system.
What are the specs of a BMW M52B28 engine?
M52TUB28 camshaft specs: duration 244/228 deg, valve lift 9.0/9.0 mm. The M52B28/M52TUB28 engine was produced until 2000 then was replaced by the newest M54B30 engine of M54 family. 1. The M52B28 engine easily can be overheated. Any overheating will destroy a cylinder head.
What kind of engine is the m52tub28?
M52TUB28 (1998 – 2001) Double-Vanos engine on both shafts. It is also equipped with cast iron sleeves and other camshafts (duration – 244/228 deg, lift – 9 mm). Specifications are as follows: compression ratio – 10.2, power – 193 HP at 5,500 rpm, 280 Nm of torque at 3,500 rpm.
How tall are the Pistons in a BMW M52?
Aluminum pistons have a compression height of 31.82 mm. Those numbers allowed getting in result “square engine” (84.0 x 84.0 mm bore and stroke). The M52 2.8L engine has an aluminum 24-valve DOHC cylinder head with variable valve timing system only for the intake (single VANOS).
What’s the difference between BMW m50tub25 and M52B28?
The M50TUB25 and M52B28 cylinder heads are interchangeable. The M52TU was released in 1998. It has some updates compare to the M52B. The big difference is dual VANOS (variable valve timing system for both camshafts), variable geometry intake manifold (DISA) and cast iron sleeves inside the block.
