How do I fix the nF error on my Samsung washer?
How To Reset nF or 4E Error Code On Samsung Washer?
- Step 1: Close the Machine.
- Step 2: Check Water Supply Valves.
- Step 3: Make Sure You Supply Water into Both Entry Points.
- Step 4: Check for Bent Supply Pipes.
- Step 5: Ensure That Nothing Is Clogging the Water Supply Hose from the Inside.
- Step 6: Check the Water Inlets.
What does nF mean on a Samsung VRT washer?
No Fill
2020. If the washing machine is not filling up with enough water, the 4E or NF (No Fill) error code will be displayed.
How do I reset my Samsung VRT washing machine?
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
What does your code mean on Samsung washer?
For example, Samsung’s washer error code UR means an unbalanced load along the drum axis. In simple words, the drum is loose and cannot pick up the required speed.
What do you do when your washing machine says nF?
Washer NF Error Code
- Water is shut off at rear of washing machine.
- Check the door is closed all the way.
- Check the hot and cold water supply hoses are not kinked, and both water supply valves are completely open.
- Water fill valve screens are clogged with mineral or calcium deposits.
Why is my Samsung VRT washer not spinning?
If your washer isn’t spinning properly , it could be because of an unbalanced load, which makes it harder for the drum to spin. An unblanced load also cause errors. “Ub” or “Ur” display is one of the sign that your washer is unbalanced. This may be because the washer is lopsided or because the load inside is uneven.
How do you reset a Samsung washer?
To reset your Samsung washing machine you need to simply disconnect the washing machine from power for 5 to 10 minutes. (Unplug the washer from the wall outlet or flip the breaker in the breaker box for the washing machine).
What are the problems with Samsung washers?
Problem: Washer trips the electrical circuit in the home when it is turned on. There has been a recall on Samsung front load washers because water leakage onto the electrical connections of the washing machine’s thermal sensor can cause an electrical short and ignite the circuit board, posing a fire hazard to consumers.
Why is my Samsung washer not spinning?
Check your breaker box and examine the breaker associated with your washer. If this breaker is in the “Off” position, there may have been a power surge that turned off your washer, thus making it impossible for your washer to spin.
How do I Clean my Samsung washing machine?
How to clean Samsung washer and its drain filter: Turn off the automatic machine and close the water supply tap. Find the hatch in the lower corner of the front panel which hides the filter. Using a flat-tip screwdriver or other tool, gently squeeze the latches on the door. Make sure you put some absorbent material or bowl under it to catch water.
