Are all 302 heads interchangeable?
Like the 289 heads mentioned earlier, all 302 heads are the same except for Thermactor provisions. There’s also a truck head (C9TE-C), which employs a 58.2-cc chamber for slightly higher compression. Ultimately all 302 heads were carryovers of the 289 head, making them all interchangeable.
How do I identify a 302 Ford head?
Ford 302 Cylinder Head Identification
- Number Location. The casting number is located under the valve cover, in the middle of the cylinder head.
- Number Decoding. The number within the code identifies the year of manufacture; a head with code C8ZZ-A would have been manufactured in 1968, and so forth.
- Other Considerations.
How do I identify a Ford v8 head?
Look for three different locations where your Ford cylinder head code number will be located: on top of the head under the valve cover; on the bottom of the head, requiring the head to be removed; and on the side of the head just under the valve cover lip.
Is 302 a good motor?
The Ford 302 small-block is one of the best-known engines in the automotive world. We review its performance and design. Ford’s 302 engine began life in 1968 as a replacement for the smaller 289, thus ushering the Ford small-block into a new era.
What is the difference between a Ford 302 and 351?
The main difference between the blocks was the Deck Height . The 351 blocks were as much as 1.300 in. taller to allow for a longer Stroke . You can spot the difference pretty easily by looking at the front of the engine.
How can you tell a 460 head?
429/460 Fanatic The cylinder head casting numbers are located on the outside of the head, along the valve cover mounting rail and between the 3rd and 4th exhaust ports. The are visible simply by raising the hood and looking at the engine.
Can I put 351 heads on a 302?
351w on a 289/302 will work just fine. getting the comp ratio correct is where you’ll have to do measuring and math. valve size remember the standard 289/302 intake valve relief on the piston is 1.78′.
Will 302 heads work on a 351W?
For the most part 302 heads and 351W heads are the same. Different years can have different combustion chamber sizes but ffor the most part there will be no performance increases by going with 302 heads. Plus you will need to drill all the head bolt holes out as the 351W uses larger head bolts.
What kind of cylinder heads do I need for a Ford 5.0L?
FORD 5.0L/302 Cylinder Heads 1 Edelbrock 5025 – Edelbrock E-Street Cylinder Heads 2 Airflow Research (AFR) 1456 – AFR 220cc SBF Renegade 20 Degree Competition Heads 3 Flotek 203-5052 – FLOTEK 180cc Small Block Ford Cylinder Heads. Need It Sooner? 4 Airflow Research (AFR) 1422 – AFR 185cc SBF Renegade 20 Degree Street Heads
What kind of cylinder head does a Ford Ranger have?
Ford Factory 5.0 Performance Cylinder Heads Ford offered a performance head that was a stock part on 1993–1995 Mustang Cobra models and pre- 1997-1/2 Ford Explorers and Mercury Mountaineers equipped with the 5.0 L engine called the GT-40 head (casting ID F3ZE-AA).
What kind of head does a Ford Explorer have?
Ford offered a performance head that was a stock part on 1993–1995 Mustang Cobra models and pre- 1997-1/2 Ford Explorers and Mercury Mountaineers equipped with the 5.0 L engine called the GT-40 head (casting ID F3ZE-AA). In mid-1997, the Explorer and Mountaineer 5.0 L heads were revised and renamed GT40P.
Can you upgrade the cylinder heads on a fox body Mustang?
It’s also well-known how easy it is to wake up your 5.0 with a few engine modifications. Stock Foxbody cylinder heads have very poor airflow, but luckily the Mustang aftermarket has a ton of upgrades available. To squeeze some more ponies out of your Fox Body Mustang, upgrading the cylinder heads can lead to some substantial results.
