Why does only half of my string of Christmas lights light up?
A light bulb has come out of its socket or is half out of its socket and it has brought down the circuit. If a bulb is missing in a circuit only the bulbs in series of it will go out. That’s how you can lose 1/2 or 1/3 or 1/4 of the string.
How do you find the burnt out bulb in a string of Christmas lights?
You can tell which bulb is out on your string of traditional Christmas lights by looking for the bulb that is “burned out” by looking at the tiny little filaments in the light bulbs to see which bulb is “burned out” or has lost it’s filament. Many times the bulb will be “smoked” as well.
Why are only half my string solar lights working?
In most instances of solar powered lights not working, it is the batteries at fault. Either they are not receiving charge or they are not holding it. If the lights work using normal batteries then it is clear that the problem is with either the rechargeable batteries or the solar panel.
Why is a section of my LED lights a different color?
As established above, when LED strip lights don’t get enough cooling, they get overheated, and the diodes can change color. One of the biggest ways this can happen is poor air ventilation around the lighting setup. There is not enough space to carry away warm air and allow cooler air to circulate.
How do you find the bad bulb on Christmas lights without a tester?
Pull out one bulb at a time, and stick a piece of folded up foil into the bulb socket. If the lights come on, you know that’s the bad bulb. If they don’t, put the bulb back in and move on to the next one.
Do Christmas LED lights burn out?
Depending on the LED, the bulb may last from 50,000 hours to 200,000 hours as compared to the 3,000 hours of an incandescent light. LEDs are also more durable and do not burn out, thus lasting longer than incadescents.
Can you put normal batteries in solar lights?
Can I use ordinary, non-rechargeable batteries in my solar lights? You can use an ordinary non-rechargeable battery to test the LED in the solar lights work as described earlier. Other than for this you shouldn’t put non-rechargeable batteries in a rechargeable garden solar light.
Why is blue not working on my LED lights?
If your circuit is not able to provide the strip with enough voltage then it will not show you the color blue. You can easily check the voltage output from the outlet with the help of a multimeter and match it with the requirements mentioned in the user manual of your RGB LED light strips.
Why are my LED lights not turning blue?
But the answer is simply that one colour of the RGB/W LEDs is not working within that section and needs replacing. This can be caused by static-electricity damage, or bending and twisting the strip too much, or being trod on, damaged in transit, a cheap poor-quality strip, or dry solder joints.
