How do I fix the UE on my washing machine?
Follow the solutions below to fix the issue and clear the UE error code.
- Make Sure the Load is Balanced.
- Run a Rinse and Spin Cycle.
- Check That the Washer Is Level.
- Adjust the Legs to Level the Washer.
- Check the Leveling Legs.
- Check the Rotor Mounting Nut.
- Check the Suspension Rods or Shock Absorbers.
- Check the Hall Sensor.
How do I fix UE code on Samsung washer?
If the door remains locked and the machine is displaying UE error, please run a drain program. You can run a drain program by selecting the spin button until it is on no spin (either spin symbol with line or zero).
How do I fix the UE on my LG washer?
If the load is balanced and your washer still displays a UE error code, you should take a look at the levelling legs under the washing machine. Make sure that they are firmly sitting on the floor to give the washer stability when it spins and avoid rocking. Adjusting the legs should make it stable, and fix the error.
What does UE on my washing machine mean?
unbalanced
A UE error code on your LG front-load washer means the washer won’t spin because the load is unbalanced. Fixing an LG washing machine UE code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
Why is my washer always unbalanced?
One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken.
Why does my washing machine keep saying uneven load?
If a top load washer’s tub begins to bang against the sides of the washer when the spin cycle begins (before reaching top speed), this indicates a likely unbalanced load. Just pause the cycle and arrange the clothes in the basket and try again. A similar issue occurs in front load washers as well.
How do you rebalance a Samsung washing machine?
Why is it important to use calibration mode?
- Remove all laundry or any other contents in the machine.
- Power off, and then power on the washing machine on again.
- Hold down Temp.
- Press START/PAUSE to run the Calibration cycle.
- The drum will rotate clockwise and counterclockwise for about 3 minutes.
Why does my washer always become unbalanced?
Why does my washer keep spinning?
The washer could have gotten stuck on any cycle, unfortunately, it just got stuck on spin. In most washers, the control panels are easy to open up and the timer is secured behind the knob by a few screws and a wire harness. You will likely need to remove the front knob before the timer itself can be fully removed.
What does UE mean on Kenmore washer?
unbalanced load
The uE error code appears when the washer’s electronic control board detects the unbalanced load and tries to correct the imbalance by adding water and agitating the laundry to distribute garments evenly in the spin basket.
Can you rebalance a washing machine?
Leveling a Washing Machine By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.
How do you rebalance a washing machine drum?
If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
What does UE mean on washing machine?
The “uE” or “UE” error fault code indicates an unbalanced load. Your LG washing machine will try to rebalance the load when it senses an imbalance. Once the washer senses the overload and or imbalance, the washer will flash “uE”.
What does UE error message mean on my washing machine?
When UE error lights up, the cause may be associated with the following things: Too much laundry in the drum; Not enough laundry in the drum; You have loaded the laundry of different fabrics that have a different weight when getting wet, which leads to an excessive load on the drum during the spin mode;
What is UE error code mean on LG washing machine?
A UE error code on your LG front-load washer means the washer won’t spin because the load is unbalanced. Fixing an LG washing machine UE code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
What do the error codes on my washing machine mean?
The PF error code indicates a power failure. This may occur if the power supply to the washer is interrupted during a cycle from power outage. Simply restart the washing cycle process. The tE error code indicates a heating error, usually caused by faulty thermistor.
https://www.youtube.com/watch?v=THlwNkmiTHM
