How do I reboot my Mac after replacing a hard drive?
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently – 15-20 minutes – until the Recovery main menu appears. Partition and Format the hard drive: Select Disk Utility from the main menu and click on the Continue button.
How do I reset my Mac Mini 2011?
Steps to Reset Mac to Factory Settings:
- Turn off your Mac completely.
- Hold down the Command and the R on your keyboard at the same time.
- Power on your Macbook, Macbook Pro, Mac Mini or other OS X computer.
- Once your Mac boots into “Recovery” mode, open the “Disk Utility”.
Can you replace hard drive in Mac Mini?
To upgrade the memory in the Aluminum “Unibody” Mac mini models released before and after the Late 2014 models, Apple has made it straightforward. Replacing the hard drive or hard drives is a more complicated procedure and Apple does not support users performing this upgrade themselves.
How do I factory reset my Mac Mini 2020?
Step 1: Shut down your Mac and restart it as normal. Once it powers on, hold down the Command + R keys, then release the keys when you see the Apple logo. This opens the MacOS Utilities window in MacOS Recovery. Step 2: Select Restore From Time Machine Backup on the list.
How do I restore my Mac Mini M1 to factory settings?
How to Factory Reset M1 Mac to Wipe & Reinstall macOS
- Entering recovery mode is different on Apple silicon Macs.
- Next, select the hard drive where macOS is currently installed from the left pane, typically “Macintosh HD”, and click on the “Erase” option located at the top of the window.
What can I do with my old Mac Mini 2011?
What to do with your old Mac minis?
- Swap or recycle minis as part of the Apple Giveback program.
- Give them away to kids, friends, or your local church or charity.
- Set them up behind a TV to run a dashboard or play movies.
- Setup your old mini as a media server.
- Create a home automation node.
Can I upgrade my Mac mini mid 2011?
Buying a new Mac computer can be an expensive affair. However, if you have an old Mac Mini lying around, like we do, you can easily upgrade it to work like a new computer.
How do you open a Mac mini hard drive?
Unplug all cables from your Mini, turn it upside down and hold it with both hands, placing your thumbs in the indentations in the circular bottom cover. Rotate the cover counter-clockwise until the white dots on the cover and case align. The cover should be loose enough to remove easily.
Where is the hard drive on a Mac mini?
Pull the hard drive away from the front edge of the mini and remove it from the outer case. During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.
How do you change the bottom of a Mac mini?
Rotate the bottom cover counter-clockwise until the white dot painted on the bottom cover is aligned with the ring inscribed on the outer case. You do not need to apply much downward pressure while turning. Tilt the mini enough to allow the bottom cover to fall away from the outer case. Remove the bottom cover and set it aside.
What kind of screwdriver do I need to replace a Mac mini hard drive?
Two 5.0 mm T8 Torx or 2.0 mm Hex screws (either screwdriver will work) It can be difficult to get the hard drive seated correctly such that the antenna plate fits in place correctly.
How do you remove logic board from Mac mini?
To remove the logic board, the two cylindrical rods of the Mac mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board. Insert the Mac mini Logic Board Removal Tool into the two holes highlighted in red.
