What is intersect in SolidWorks?
You can intersect solids, surfaces, or planes to modify existing geometry, or to create new geometry with the Intersect tool. For example, you can add open surface geometry to a solid, remove material from a model, or you can create geometry from an enclosed cavity.
How do you use the Intersect tool in SolidWorks?
To intersect or merge bodies:
- With the part open, click Insert > Features > Intersect .
- For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
- Select Cap planar openings on surfaces to cap flat openings in surfaces.
- Click Intersect.
- Select regions to exclude.
- Select options as required:
- Click .
What is the Intersect feature?
About the Intersect Feature. With the Intersect tool you can create a curve where a surface intersects with other surfaces or a datum plane. You can also create a curve at the intersection of two sketches or sketched datum curves that become surfaces after they are extruded.
How do you find the intersection in SolidWorks?
In the dimension tool, right-click the sketch entity or model geometry, and click Find Intersection. Select the model geometry or sketch entity that intersects your original selection. The virtual sharp is found and applied to the active dimension tool.
How do you merge bodies in SolidWorks?
To add bodies together:
- Click Combine. (Features toolbar) or Insert > Features > Combine.
- In the PropertyManager, under Operation Type, select Add.
- For Bodies to Combine, select the bodies to combine. You can select bodies in the graphics area or the Solid Bodies.
- Click Show Preview to preview the feature.
- Click .
How do you indent in SolidWorks?
To create indent features:
- Click Indent (Features toolbar) or Insert > Features > Indent.
- In the PropertyManager, under Selections: Select a solid or surface body to indent in the graphics area for Target Body .
- Under Parameters: Set the Thickness (solids only) to determine the thickness of the indent feature.
- Click .
Do two polygons intersect?
Examples: Polygon inputs Polygons can intersect in three ways: Overlap—Area of overlap can be produced by leaving the Output Type to its default value (LOWEST). Touch at a point—This type of intersection can be produced by specifying POINT as the Output Type.
Where is the intersect tool ArcGIS?
In ArcGIS and ArcGIS Pro, the Intersect Tool is part of the Analysis Toolbox and within the Overlay Toolset. It’s a very basic tool in which you add layers that you want to intersect. You also set the ranks for how attributes will be ordered in the output feature.
How do you find the midpoint in SolidWorks?
Dimensioning to Midpoints
- Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart.
- Right-click the edge whose midpoint you want to dimension, and click Select Midpoint.
- Select the second entity to dimension.
- Use rapid dimensioning to place evenly spaced dimensions.
How do you make an intersection point in SolidWorks?
Here’s how it works: 1) with the Smart Dimension tool already active, you right-click on one of the desired entities and 2) select “Find Intersection” from the menu. Then 3) click the other entity that creates the intersection. The first dimension line is now attached to that virtual sharp.
How do you combine two extrusions in Solidworks?
What is merge result in Solidworks?
You have unchecked the option for “Merge result,” therefore the new extrusion will not be merged to the rectangular base and will become its own body. This technique is used in advanced modeling to control which features affect which bodies. It could also be used to design an entire assembly within a single part file.
What do you need to know about intersect in SolidWorks?
SolidWorks 2013’s new and powerful tool Intersect enables you to perform complex operations to quickly combine surfaces, planes and solid bodies without the need for multiple cut, trim, fill and knit features. The following is an example of how Intersect can help you to quickly build a part from multiple intersecting surfaces.
How is Intersect used to build a part?
The following is an example of how Intersect can help you to quickly build a part from multiple intersecting surfaces. This is a set of surface bodies that will be used to create the exterior of a new consumer product. The goal is quickly combine these surface bodies into a final solid body shape that can then be shelled.
How to create a list of intersection regions?
Choose Intersect button. A list of intersection regions is quickly generated in the Regions to Exclude box in the PropertyManager. In the case of this project, there is only one region, so there will be nothing to exclude. Make sure Merge result is checked on the Options box in the PropertyManager.
