How do you program a Uniden Bearcat BC350A scanner?

How do you program a Uniden Bearcat BC350A scanner?

How to Program a Uniden Bearcat BC350A Scanner

1. Press “Hold” when the scanner stops on a frequency you want to store. Watch for the “HOLD” icon on the screen.
2. Press “PROG” to enter the programming mode.
3. Press “PROG” to exit the programming mode once you have stored all of the frequencies you want to save.

How do I reset my Uniden Bearcat BC350A scanner?

Reset Uniden Scanner

1. Turn the scanner OFF and unplug the audio cable from the rear of the scanner.
2. Press and hold the L/O and PROG buttons.
3. While holding L/O and PROG, turn the scanner on.
4. Release the L/O and PROG buttons.
5. Press the PD/FD/EMG button THREE times.
6. Press the AIR/MRN button THREE times.

How do you program a Uniden Bearcat bc178xlt?

Instructions

1. Turn on the Uniden scanner by turning the “Volume” control knob to the right until you hear a click.
2. Locate and write down a list of frequencies in your area that you want to program into your scanner.
3. Press the “Man” button to enter manual mode, which will allow you to input a frequency.

How do you program a bearcat police scanner?

Programming a Handheld Model of the Uniden Bearcat Scanner

1. Ensure the battery is fully charged, or plug in the AC adapter.
2. Press the “Scan” button to put the handheld into scanning mode and press “Manual” to enter manual programming mode.
3. Enter the frequency you wish to store, using the numeric keypad.

How do you program a Uniden Bearcat bc700a scanner?

Member

1. Press Search.
2. Press Band to locate the frequency band.
3. Press Hold when you get close to the frequency you want. Then using the Up or Down key locate the exact frequency.
4. Press Program.
5. Press Private.
6. To locate the channel you want press the Up or Down key.
7. Once you locate the channel, press program.

How do I program BC147XLT?

How to Program a Bearcat BC147XLT Scanner

1. Turn the scanner on.
2. Press the “Manual” button. This will cause the unit to cease its scan.
3. Press the channel number that you are programming then press “Manual” again.
4. Enter the frequency that you wish to program using the numeric keypad.
5. Press the “E” button.

How do I setup my Baofeng scanner?

How to manually program the Baofeng UV-5R from the keypad

1. Press [VFO/MR] and enter Frequency Mode.
2. Press [A/B] and choose the A Side (upper display).
3. Press [BAND] for the frequency band.
4. Disable TDR (Dual Watch/Dual Standby).
5. Enter the frequency.
6. optional – Enter the transmit CTCSS/DCS code.

Can a Uniden Bearcat scanner be used on Hunker?

Hunker may earn compensation through affiliate links in this story. The Uniden Bearcat BC350A base scanner allows you to scan channels on five separate service banks as well as your own customizable private bank.

How many bands does the Bearcat bc350a scanner support?

You can save your favorite frequencies in one single bank for easy scanning or sort the frequencies into banks based on the type of emergency response. The BC350A supports 11 bands to broaden the scanning capabilities.

Is the beaecat radio printed in the Philippines?

Printed in the Philippines From what I have read, the Beaecat is a pretty dependable radio. Depending on which text editor you’re pasting into, you might have to add the italics to the site name. This prevents any unauthorized pro- gramming or accidental entries. Login to post Please use Uniden bearcat bc350a manual characters only.